Home / AS Series / SPARK-GEL

SPARK-GEL

TORCH TIPS

Protective gel for torch tips and nozzles.

Request a SPARK-GEL Trial

Description

What it does and how it works

It protects MIG/MAG torch consumables so that metal spatter doesn't stick to the nozzle or block the shielding-gas outlet, forming a thermal, non-stick barrier.

  • Extends the service life of tips, nozzles, and diffusers
  • Keeps shielding-gas flow stable
  • Reduces station downtime for torch cleaning
  • Dip application in seconds, with no need to disassemble the torch
  • Silicone-free: doesn't contaminate the part or the finish
Ideal for: welders seeking maximum torch life and reliability, especially in enclosed shops and continuous production work.

How to Use

Four steps on the floor

1

Check

The tip must be hot (operating temperature) and free of loose spatter.

2

Dip

Dip the torch tip into the gel for 1–2 seconds; the excess drips off on its own.

3

Operate

Continue the normal cycle; the barrier keeps spatter from bonding inside.

4

Repeat

Reapply at every part change or according to process severity.

Try it in your process before you buy

A technical diagnosis and a trial application of SPARK-GEL, no commitment. You measure the result on your own parts.

Schedule a Technical Visit

Frequently Asked Questions

About SPARK-GEL

How is SPARK-GEL applied to the torch tip?
The hot torch tip is dipped into the gel for 1 to 2 seconds; the excess drips off on its own, with no need to disassemble the torch.
Does SPARK-GEL work for both manual and robotic welding?
Yes. SPARK-GEL protects any MIG/MAG torch tip or nozzle, regardless of whether the process is manual, semi-automatic, or robotic.

Complete the protection

Other products in the AS Series

Request a SPARK-GEL Trial